Reiner Sct Card Reader Driver Download For Windows
SOLUTION 1 - Verify if minimum system requirement is met.
SanDisk card readers support Windows Vista, Windows XP SP2 and Windows 2000 SP4, Windows 7.
NOTE: No additional drivers need to be downloaded for the card readers as they are native to the above mentioned supported operating systems.
For Mac users, seeTroubleshooting USB device on Mac
SOLUTION 2 - Verify the reader's status under Device Manager.
STEP 1 - Connect the reader to the PC
NOTE: It is recommended that you plug your card reader to the back USB port on your PC to ensure that there is enough power from the USB port for the card reader to be detected properly.
STEP 2 - Check under Device Manager
1. Right-click My Computer.
2. Select Manage.
3. On the left pane, click Device Manager.
NOTE: The card reader will appear in two places: Disk Drives and Universal Serial Bus controls as USB Mass Storage. If there is a yellow exclamation point (!) or question mark (?) next to the device, try to refresh the drivers.
STEP 3 - Refresh the drivers
1. Right-click the entry with the error mark, select Uninstall.
2. On the top menu, click Action, and then click Scan for hardware changes.
STEP 4 - Verify if the reader is detected
1. Double-click My Computer.
2. Look for the card reader under Devices with removable storage.
SOLUTION 3 - Try other USB ports.
A yellow exclamation point (!) under Device Manager usually means that the device is not receiving enough power. If the reader is not receiving ample amount of power from the USB port, it may not function properly.
SOLUTION 4 - Change the drive letters
NOTE: The SDDR-89, SDDR-189, SDDR-289 reader should show 4 drive letters underMy Computer.
Reiner Sct Card Reader Driver Download For Windows Xp
Connect the SD with either the card reader or the GT itself and the USB cable; Highlight the card in the update agent, and select “select device” 4. Select your device (40417, 40420, etc.) then select “download and upgrade” 5. Wait for the download to finish, you will see this message. Remove support of Reiner-SCT cyberJack pinpad(a) on request of Reiner-SCT. You should user the Reiner-SCT driver instead; define CFBundleName to CCIDCLASSDRIVER so that non class drivers have a higher priority. Used by pcsc-lite 1.5.5 and up. Add a -disable-class configure option so that the Info.plist does not define a Class driver.